Purple Let's Party

Happy Friday, DT Annalisa here! I'm excited to share a colourful purple party card I created using several Time For Tea Designs stamp sets and Ranger alcohol inks.

To create the background, I used a variety of alcohol inks, Ranger blending solution, 99% isopropyl alcohol, and an alcohol ink applicator with a felt tip on Yupo paper. The colours I chose are Ranger Indigo, Glamingo, and Amethyst.

I die-cut this panel using the Sweet Scalloped Dies and adhered it to a card base with liquid glue.

For the sentiment, I die-cut the Let’s Party Large Sentiment Die once from silver glitter cardstock and twice from white cardstock. I glued these layers with liquid glue to add dimension before attaching them to the card base.

Next, I die-cut a circle from white cardstock with the Stitched Circle Dies and ink-blended it using Speckled Egg and Tumbled Glass Distress Oxide for the sky section. I added splatter using Speckled Egg Distress Watercolour Pencil mixed with water and applied it with a watercolour brush.

I ink-blended with Lost Shadow for the ground section and added splatter using Pumice Stone Watercolour Pencil. I then die-cut vellum with the Scalloped Circle Dies and glued it to the ink-blended circle before attaching it to the card base.

I stamped images from the Birthday Fox, Let’s Party and Lucky Ducks, coloured them with Copics, and cut them out using their coordinating dies. I added white gel pen accents for extra detail.

Finally, I used thin double-sided foam tape to adhere the images to the card and finished it off with Summer Haze Designer Enamel Dots.

Thank you so much for reading my blog post! Be sure to use my discount code T4TANNALISA10 when you visit the Time For Tea Designs shop to get 10% off your order.

Party Duck

Hello, and Happy Friday! DT Annalisa here. Today's project is a fun birthday card I created using the Lucky Ducks stamp set and several dies from Time For Tea Designs.

To make the background, I used alcohol inks on Yupo paper and the Tim Holtz Ink Air Blower. I combined Alcohol Blending Solution with alcohol inks in Amethyst, Indigo, and Mermaid to create a teal and purple background.

Once the background was dry, I die-cut it with the Stitched Quilted Cover Die and attached it to a card base with liquid glue.

Next, I used an Evergreen Bough watercolour pencil on watercolour paper. I soaked the pencil in water, scribbled it onto acetate, and then spritzed the acetate with water. After that, I pressed the acetate onto the watercolour paper repeatedly, heat-setting and spritzing with water as needed.

I die-cut the watercolored panel using the Stitched Circle Dies and adhered it to White Silver Neenah cardstock, which I had previously cut with the Scalloped Circle Dies. I then used double-sided foam tape to attach these pieces to the card base.

For the sentiment, I used the Let’s Party Large Sentiment Die on both White Silver Neenah and black cardstock. I layered them slightly offset with liquid glue and then adhered the sentiment to the card base.

I stamped one of the ducks from the Lucky Ducks stamp set and a balloon from the Birthday Fox stamp set. After colouring the images with Copics, I cut them out using their coordinating dies and attached them to the card base inside the circle panel with liquid glue.

To finish the card, I added silver stars that I die-cut with a small star die from my stash and included Clear Bubbles Designer Enamel Dots.

Thank you so much for reading my blog post! Be sure to use my discount code T4TANNALISA10 when you visit the Time For Tea Designs shop to get 10% off your order.

Colorful foxes with Kaja

Hi all,

It's Kaja from Kajcyika crafts and today I am back with a bright and adorable birthday card!

Take a look:

This time around, I wanted to make a bold card for my nephew that just loves anything colorful. I started off by stamping two cute little foxes from Birthday fox stamp set. 

Since I know I wanted to use bold colores, I decided to go with a gray color for foxes and use more color with other images and the background.

Next, I die cut two rectangles from the A2 Stitched hearts cover die from white cardstock that I will use as a cover for my card.

Then, I cut down a piece of yellow and red colorful paper from the Sweet summer paper pad. I trimmed it down to be the same size as my card base and positioned it behind the white panel, so it nicely peeks out the rectangles.

I stamped out the sentiment from Birthday fox in black ink and this time I decided to go with a simple 'Happy birthday'.

I glued everything on the square card base using double sided foam squares and liquid glue.

Hugs,

Kaja

T4T supplies used: 

• Stitched hearts cover die
• Birthday fox stamp set
• Sweet summer paper pad

Celebration withxes and Kaja

 Hi all,

It's Kaja from Kajcyika crafts and today I am back with an adorable card with two little foxes!

Take a look:

I don't know about you, but I just love adorable little critters, so I decided to color two cure little foxes from Birthday fox stamp set. 

I decided to go with a traditional orange color in combination with gray and small white gel pen details. Since this is a celebration card, I added a cute little balloon that I colored in with green.

To create the background I used a Stitched hearts cover die and a piece of white cardstock. I wanted to have a bright scene, so I decided to create the center of the card using a rectange die from the same die set, but I used patterned paper from Brighter days paper pack instead of a normal cardstock.

Next, I added the sentiment from the same Birthday fox stamp set that reads 'let's celebrate'. I used black ink and stamp it out at the bottom of my little scene.

The last thing I did, was that I glued everything on a card base using double sided foam squares and liquid glue.

Hugs,

Kaja

T4T supplies used: 

• Birthday fox stamp set
• Stitched hearts cover die
  
• Brighter days paper pad

I Chews You my Valentine

Happy Friday! DT Annalisa here sharing a sweet Valentine's Day card featuring the adorable Gummy Bears and their coordinating die set.

I pressed picked raspberry and abandoned coral Distress Ink onto acetate, sprayed it with water, then took the acetate and smooshed the ink onto watercolour paper. I added white splatter with a paintbrush, water and Copic opaque white.

Once dry, I die-cut the inked panel with a stitched rectangle die in my stash. I glued this down onto an A2 card base that was ink-blended with hickory smoke Distress Oxide. 

I trimmed a piece of patterned paper from the Pretty Pastels 6x6 Paper Pad down to 1 and 3/4 inches high and ink-blended the edges with peacock feathers Distress Ink. I also die-cut it with the same stitched rectangle die and then glued it to the pink-inked panel. 

I stamped and coloured (with Copics) images and the sentiment from the Gummy Bears and Birthday Fox stamp sets and cut them out with their coordinating dies. I added white gel pen accents with a Gelly Roll Pen. 

I used double-sided foam tape to stick all the elements to the card base. I added white enamel dots and a white enamel heart to complete the card. 

Thank you so much for reading my blog post, be sure to use my discount code T4TANNALISA10 when you visit the Time For Tea Designs shop to get 10% off your order.

Happy birthday....

Hey there Tea-timers...

DT Ashlee here with my weekly Time for Tea designs inspiration....

This week my card is a birthday themed one featuring a cute fox and lots of birthday yummies!

T4T products I used to create this card....

- Birthday fox

- Birthday cake

To create this card I started with a white card base and masked off the bottom portion so that I could ink it up with Twisted citron distress oxide ink. Once I'd filled the top portion with ink I stamped a bunch of the images over it from the birthday cake set using peeled paint distress oxide ink...

I gave it a splatter of black paint and then once it was dry I stamped the sentiment "happy birthday" using Memento tuxedo black ink.

I stamped, coloured and die cut some images from the birthday fox set before adhering them to the card base using foam tape. A touch of sequins and the card was complete!

A simple yet sweet birthday card for the birthday celebrations card stash...

Thanks for stopping by. Happy crafting, hugs Ashlee. 

Big Birthday Wishes

 

Hey there, Tea Timers!!  It's Amanda here! I'm excited to be here with you to share some birthday card inspiration!

To make this card, I started by creating a textured background on black cardstock.  To create the textured background, I used a patterned stamp and stamped it with Clear Glue Embossing Ink.  Next, I added clear embossing powder on top.  Then, I melted the powder with my heat gun.

Then, on a piece of white cardstock, I ink blended Catherine Pooler's It's a Girl, Limoncello, and Something Borrowed inks to create a rainbow background.  Then, I die cut my panel with the Big Birthday Wishes Large Sentiment Die.  I also cut another white panel with the die to use as a shadow.

Next, I stamped some images from the Baked with More Love Stamp Set and the Birthday Fox Stamp Set.  Once I got them colored in with my Copic markers, I die cut them out with their coordinating dies.

I adhered all my components onto the card with 3D foam squares.  I also added some different sequins all over the background using liquid glue.

Let's Party

 

Happy Friday! DT Annalisa here, my T4T project today is a celebration card featuring the Let’s Party stamp set. The kitty popping out of the gift is my favourite stamp in the set. When I was a teenager, my parents got me a ginger kitty for my birthday as a complete surprise and I loved it. 

I sprayed Dusty Concord Distress Oxide Spray through the Movie Star 6 x 6" Stencil, removed the stencil and sprayed Salvaged Patina Distress Spray to create the background panel. I added black watercolour splatter once the panel was dry. I added this background to an A6 card base.

 

I ran white cardstock through my Bigshot twice, once using the Stitched Quilted Cover Die and a second using the Wonky Windows Cover Die. I stamped the Let's Party sentiment to the panel using my MISTI and then used double-sided foam tape to stick it to the card base.

I stamped and coloured (with Copics) images from the Let’s Party, Birthday Fox, and Birthday Cake stamp sets and cut them out with their coordinating dies. I added white gel pen accents with a Gelly Roll Pen. 

I adhered the images to the card base using liquid glue or double-sided foam tape for dimension. 

Thank you so much for checking out my blog post. Remember to use my discount code T4TANNALISA10 when you visit the Time For Tea Designs shop to get 10% off your order.

 

Hey, Congrats

 

 Happy Friday, DT Annalisa here! The first day of Fall, or autumnal equinox, arrives tomorrow, so I am sharing a card with a fall feel. It features the Birthday Fox clear stamp set from Time For Tea Designs.

For the background, I ink-blended tumbled glass and salty ocean Distress Oxides with my Beautiful Blender Brush onto Distress White Heavy cardstock by Ranger. Using a paintbrush, I added splatters of water and uncharted mariner Distress Oxide. For the grass, I ink-blended twisted citron, mowed lawn Distress Oxides and added water splatters. 

I die-cut the grass with the Slimline Hillside Scene Dies and stuck this to the sky panel with liquid glue. I then added this panel to an A2 card base.

I stamped and coloured (with Copics) the foxes from the Birthday Fox clear stamp set and cut them out with my Brother Scan N Cut SDX125e. I added white gel pen accents with a Gelly Roll Pen. I did the same process with the leaves from Jumping With Joy and Bee and Butterfly from I Really Dig You.

I used liquid glue to stick the leaves to the card and double-sided foam tape for the rest of the critters. 

The hey letters were die cut from black cardstock using the Hey, Hello, Hi Dies. I die cut vellum using the word shadow die in this set. I used liquid glue to adhere the letters to the shadow area and then behind the letters and stuck this to the sky area on the card. 

I stamped congrats from the You’re Engaged stamp set with VersaMark ink and heat embossed using white Ultra Fine Embossing Powder by Brutus Monroe. I die-cut the sentiment using the coordinating die set. I used liquid glue to stick the congrats to the bottom of the card. 

Thank you so much for reading my blog post. Remember to use my discount code T4TANNALISA10 when you visit the Time For Tea Designs shop to get 10% off your order.

Happy Birthday to My Foxy Friend!

Hey there, Tea Timers!!  It's Amanda here and today I am sharing another card using some products from the New Release! 

Today, I am using the Birthday Fox Stamp Set.

To create this card, we're going to start by trimming down a piece of white cardstock to 4" x 5.25".  On this panel, we'll stamp champagne/wine bottles all around the background.  I always start in the center and then work my way out to the end.

Next, we'll grab an oval die and cut it out.  We'll blend Catherine Pooler's Wintergreen ink all around it and then give it a little spritz from a water bottle to create some water droplets.

Then, we'll stamp and color all our images with Copic markers.  I've used the coordinating dies to cut out the stamped images, but you could also use a Scan n' Cut or scissors!

Next, we'll assemble our card.  We'll use liquid glue to adhere our front panel to the card base.  Then, we'll use glue to adhere our oval.  Next, we'll use 3D foam squares to attach our fox and bottle.

The last step is to add a few sequins with the tiniest bit of glue!

That's it for me today, friends!  I hope you love this cute little foxy card!

Xx, Amanda

 

Let's PARTY fox!

Hey there Tea-timers...

DT Ashlee here, who's ready to party?! I hope you are because I have a party themed card to share which might make you want to get your party on too.... 

This card uses these Time for Tea designs products :

- Birthday fox stamp & co-ordinating die collection

- Let's party large sentiment die

- Simple square nesting die

To create this card I started with a white card base that I inked with distress oxide ink Mustard seed. I then splattered it with Gansai Tambi paint. Once it was dry I adhered a layered square set from the simple squares die cut from black and yellow card. 

I die cut the Let's party sentiment from black and blue card stock so I could adhere them together slightly off set to create a shadow. Also added little ink shading to the bottom of the blue cut. This was adhered so it would hang off the focal square. 

I stamped a bunch of images from the Birthday fox set and coloured them up with Spectrum noir tri-blend markers before die cutting them with the co-ordinating dies. These were all arranged and adhered above the sentiment. 

To complete the card I added a stamped sub sentiment also die cut with the co-ordinating die and a touch of pretty yellow sequins!

This fox is ready to PARTY! 

I hope you enjoyed my card today, thanks for stopping by. Until next post happy crafting, hugs Ashlee. 

big birthday wishes....!!

Hey there Tea-timers...

DT Ashlee here and today I've got big birthday wishes inspiration to share!

I've been having lots of fun creating with the brand new release from T4T, it's all so much fun....

Time for Tea designs products used for this card are :

- Birthday cake stamp set

- Birthday cake co-ordinating die set

- Big birthday wishes sentiment die

- Star stitched cover die

- Birthday fox stamp set

- Birthday fox co-ordinating die set

To create this card I started with a yellow card stock base. I then die cut the star stitched cover die from green card stock and then add green ink splatters to it. The cover panel was then adhered to the yellow base using foam tape just so it popped up slightly from the base. 

Using the sentiment die I die cut it twice, once from black card stock and then once from a teal blue card stock. These were adhered together with liquid glue slightly off set creating a shadowed sentiment. I used foam tape to adhere this to the card base.

I stamped, coloured and die cut the sweet little birthday cake and candle and added that to the top corner of the card. 

To complete the card I added a sub sentiment "happy birthday" from the Birthday fox set (die cut using the co-ordinating die) and a touch of sequins!

 I hope you enjoyed this big birthday wishes card ready for a birthday! 

I will be back next week with more T4T inspiration. Until then happy crafting, hugs Ashlee.

Sweet Birthday Wishes

Hello, and happy Friday! DT Annalisa here sharing a sweet slimline card featuring the Birthday Cake stamp set. This stamp set features sweet treats with bold lines that are great for birthday cards.

I used the Simple Slimline Nesting Dies to die-cut three panels for this card: Neenah Solar White 80 lb card stock, black card stock and purple patterned paper. I glued the black cardstock and purple paper to a slimline card base.

I stamped and coloured (with Copics) several images from the Birthday Cake stamp set and one from the Birthday Fox clear stamp set. I added white gel pen accents with a Gelly Roll Pen. I used a 0.3 Copic Multiliner to draw a line for the table.

I masked off every image (yup, even the tiny cherry!) by stamping them on masking paper, cutting them out and placing them down on the paper over their respective stamped image. It enabled me to layer stamp sets and use a stencil on the background. 

I ink-blended lost shadow distress oxide using my Beautiful Blender Brush through the Simple Stripes 6 x 6" Stencil. I used low tack tape to mask off the table during this process. I moved the tape and ink-blended antique linen distress oxide on the table area.

I stamped 'sweet birthday wishes' once the ink was dry. I glued this panel to the card base and added Glossy Accents by Ranger to complete the card. 

Thank you so much for reading my blog post. Remember to use my discount code T4TANNALISA10 when you visit the Time For Tea Designs shop to get 10% off your order.